PROBLEM SOLVING HOT ROD CHASSIS PARTS FOR OVER 40 YEARS.
If you plan to use a Ford 8.8 rear end or a GM rear end with the upper bar ears on the center section, we have a kit with brackets to fit on the upper axle bushings. These brackets must be welded to the upper bars after the bars have been cut to length. The upper bars in the kit are longer so the kit will work in frames of different widths. In both the welded and ready to weld kits, these upper rear end mounts are not welded to the bars. Because this bracket has many applications, the 7/16″ diameter bolt hole must be drilled to your bolt size.
GM has used a triangulated rear four link in many of their cars for decades. The design eliminates the Panhard bar. To accommodate many frame widths, the formed upper frame brackets may need to be trimmed. Bars are 1″ heavy-wall seamless tubing, tapped one end 3/4-16 and notched for the urethane bushing tube on the other end. Coil-overs can be mounted in one of three holes.
Assembly and installation tips are provided.
Every customer is different. You’re different from the next customer. That’s why they’re called 'custom'ers. There is no formula, no equation that will work with all of you. It takes a different approach to everyone to determine how best to serve anyone. Some people need videos, some people need descriptions. Some people need us to weld it together. Our approach has been, and will always be, to serve each of you where you are and to treat you the same way we would like to be treated. We officially opened the doors to Welder Series in 2005. That doesn’t sound like very long, because the product line has been percolating for over 40. Paul Horton began developing and building many of the parts we still manufacture when I wasn’t yet a twinkle in Dorothy’s eye. Thanks very much for your business and support over the years.
-Paul, Dorothy, and DW (me) Horton
Note DW and Paul Horton at Welder Series absolutely rock and were quick, prompt, by far the best communication I’ve had with an online vendor in a LONG LONG TIME… (Sorry but their response time was bar none awesome). Very rarely do you find the level of dedication to a customer, communication, and a rewarding experience for both the buyer and supplier. I bought a pedal assembly a bit ago, and that experience automatically ensured that I will source Welder Series before I search for another vendor. Paul and DW have it together and will make a solution to your problem… and probably at the best price around to boot.
Son of Paul
Welder Series is a three person family business focused on serving our customers with consistently high quality parts, exceptional service and support, and reasonable prices.
We're located about an hour west of Toronto, in southern Ontario.
244 Woolwich St S, Unit 4, Breslau Ontario. N0B 1M0
Monday - Friday
Please call before coming.