PROBLEM SOLVING HOT ROD CHASSIS PARTS FOR OVER 40 YEARS.
This kit has proven to be adaptable to many frames. The bars mount beside the frame rail (inside the frame or outside, as shown in the pics). The upper bar will be about 3″ above the bottom of the rail. Rear axle brackets have 3 mounting holes for the coil-overs. Bars are about 25” c-c. (4 bars are included in the kit. Custom lengths are available. See the parts section under ”Bars”). Axle brackets are 3/16" mild steel.
If you want to use a 2" x 4" tube as a frame mount/crossmember, we now have a plate for that. Please see the list of add-ons to the right. We can substitute these plates in place of the frame brackets which normally come in the kit. Designed for big bushings. 2" x 4" tube also available.
Please see related products for an adjustable ride height setup tool that can be used in place of your coilovers while you build the car. You can keep your coilovers in perfect condition and make sure you have room for things like exhaust and the driveshaft through suspension travel.
Available with axle brackets for 3-1/4" tubes - see Add-Ons.
Two parallel four link kits are offered, both are complete kits with the following variations:222501 (available welded and ready-to-weld)1-3/4″ wide, 1-5/8″ OD urethane bushings3/4-16 threaded adjusters
2220 (available welded only)1-3/8″ wide, 1-3/8″ OD urethane bushings5/8-18 threaded adjusters
The bracketry for each kit is matched to the OD of the bushing for a clean appearance. Brackets are artfully TIG welded.
NEWS: The 1-3/8″ bushing, ready-to-weld kit has been discontinued.High demand for the kits with the 1-3/4″ wide bushings is reducing sales of the 1-3/8″ kits, making the 1-3/8″ kits more expensive to produce. We still have components for the 1-3/8″ kits and as those inventory levels go down, a decision about their future will be made. Please allow a one week lead time for the small bushing kit.
Parts Included: Frame brackets, axle brackets, bars, hardware, bushings, adjusters, and instructions.
Shipping Info: Ships for $37-$43 via UPS, with tracking information sent to your email.
Instructions: Please click here to see a PDF of the instructions for this kit.
What's the difference between welded and ready-to-weld? In the welded kit, anything that can be welded by us is welded. The frame brackets, bars, adjusters, and the coil over support block inside the axle brackets are all welded. The ready-to-weld kit has nothing welded. Some people find this an advantage because they can save some money and have the option of tweaking the angle that the bar brackets are welded to the front frame bracket.
This is a video shot by a customer (check out his thoroughly YouTube documented build):
Every customer is different. You’re different from the next customer. That’s why they’re called 'custom'ers. There is no formula, no equation that will work with all of you. It takes a different approach to everyone to determine how best to serve anyone. Some people need videos, some people need descriptions. Some people need us to weld it together. Our approach has been, and will always be, to serve each of you where you are and to treat you the same way we would like to be treated. We officially opened the doors to Welder Series in 2005. That doesn’t sound like very long, because the product line has been percolating for over 40. Paul Horton began developing and building many of the parts we still manufacture when I wasn’t yet a twinkle in Dorothy’s eye. Thanks very much for your business and support over the years.
-Paul, Dorothy, and DW (me) Horton
Note DW and Paul Horton at Welder Series absolutely rock and were quick, prompt, by far the best communication I’ve had with an online vendor in a LONG LONG TIME… (Sorry but their response time was bar none awesome). Very rarely do you find the level of dedication to a customer, communication, and a rewarding experience for both the buyer and supplier. I bought a pedal assembly a bit ago, and that experience automatically ensured that I will source Welder Series before I search for another vendor. Paul and DW have it together and will make a solution to your problem… and probably at the best price around to boot.
Mike in Green Bay
Son of Paul
Welder Series is a three person family business focused on serving our customers with consistently high quality parts, exceptional service and support, and reasonable prices.
We're located about an hour west of Toronto, in southern Ontario.
244 Woolwich St S, Unit 4, Breslau Ontario. N0B 1M0
Monday - Friday
Please call before coming.