PROBLEM SOLVING HOT ROD CHASSIS PARTS FOR OVER 40 YEARS.
For four link front suspension. The c-plate is designed to mount the side plates vertically even though the axle boss is on an angle.
Laser-cut steel side plates fit neatly onto the c-plate. Designed for 2″ or 2-1/4″ axle boss. WS14110
Parts included:Batwing boss, 10036, 4Batwing side plate, 14106, 4C-plate, driver side, 14104, 1C-plate, passenger side, 14105, 1
Use the perch bolt or a 5/8 bolt to assemble the bosses on the axle.
Put a thin piece of card (cereal box is a good thickness) between the axle and one boss.
Nest the c-plate against the bosses and slide the plate along the boss. It will probably slide about ¼” total. Split this amount and tack the c-plate to the bosses.
Remove the assembly from the axle and finish welding the bosses to the c-plate. Repeat with the other c-plate.
Assemble the side plates using the urethane bushing inner sleeves. Don’t use the urethane bushings! Add the thickness of the cereal box cardboard for clearance.
If you have the kit with the bolt-on Panhard hole in one side plate, assemble that side first. The bolt-on plate goes on the passenger side bracket, closest to the frame.
Hold the side plate assembly against the c-plate assembly and tack. Leave the spacers between the side plates to give the assembly more structural integrity while welding.
Every customer is different. You’re different from the next customer. That’s why they’re called 'custom'ers. There is no formula, no equation that will work with all of you. It takes a different approach to everyone to determine how best to serve anyone. Some people need videos, some people need descriptions. Some people need us to weld it together. Our approach has been, and will always be, to serve each of you where you are and to treat you the same way we would like to be treated. We officially opened the doors to Welder Series in 2005. That doesn’t sound like very long, because the product line has been percolating for over 40. Paul Horton began developing and building many of the parts we still manufacture when I wasn’t yet a twinkle in Dorothy’s eye. Thanks very much for your business and support over the years.
-Paul, Dorothy, and DW (me) Horton
Note DW and Paul Horton at Welder Series absolutely rock and were quick, prompt, by far the best communication I’ve had with an online vendor in a LONG LONG TIME… (Sorry but their response time was bar none awesome). Very rarely do you find the level of dedication to a customer, communication, and a rewarding experience for both the buyer and supplier. I bought a pedal assembly a bit ago, and that experience automatically ensured that I will source Welder Series before I search for another vendor. Paul and DW have it together and will make a solution to your problem… and probably at the best price around to boot.
Mike in Green Bay
Son of Paul
Welder Series is a three person family business focused on serving our customers with consistently high quality parts, exceptional service and support, and reasonable prices.
We're located about an hour west of Toronto, in southern Ontario.
244 Woolwich St S, Unit 4, Breslau Ontario. N0B 1M0
Monday - Friday
Please call before coming.