PROBLEM SOLVING HOT ROD CHASSIS PARTS FOR OVER 40 YEARS.
Laser cut from 1/4″ steel. Holes for adjusters are 5/8″. Designed to use 21″ center to center bars. Can be used with our urethane bushed adjusters or spherical rod ends. Axle tube hole is 3″. The coil-over hole is 1/2″ so a spherical bearing can be used, or you can drill it to 5/8″ for coil-overs with 5/8″ urethane bushing ends. The radius around the bar holes is the same as our #1205 urethane bushing outer tubes, but heim joints can also be used.
The coil-over hole is 6″ below axle centerline. The 3/8″ upper hole is for a sway bar mount. From the center of the lower 4-link hole to the enter of the upper hole is 11-1/2″. The 1-1/2″ hole below the axle can be used for tubular reinforcement.
This plate can be used with #212412.
Every customer is different. You’re different from the next customer. That’s why they’re called 'custom'ers. There is no formula, no equation that will work with all of you. It takes a different approach to everyone to determine how best to serve anyone. Some people need videos, some people need descriptions. Some people need us to weld it together. Our approach has been, and will always be, to serve each of you where you are and to treat you the same way we would like to be treated. We officially opened the doors to Welder Series in 2005. That doesn’t sound like very long, because the product line has been percolating for over 40. Paul Horton began developing and building many of the parts we still manufacture when I wasn’t yet a twinkle in Dorothy’s eye. Thanks very much for your business and support over the years.
-Paul, Dorothy, and DW (me) Horton
Note DW and Paul Horton at Welder Series absolutely rock and were quick, prompt, by far the best communication I’ve had with an online vendor in a LONG LONG TIME… (Sorry but their response time was bar none awesome). Very rarely do you find the level of dedication to a customer, communication, and a rewarding experience for both the buyer and supplier. I bought a pedal assembly a bit ago, and that experience automatically ensured that I will source Welder Series before I search for another vendor. Paul and DW have it together and will make a solution to your problem… and probably at the best price around to boot.
Mike in Green Bay
Son of Paul
Welder Series is a three person family business focused on serving our customers with consistently high quality parts, exceptional service and support, and reasonable prices.
We're located about an hour west of Toronto, in southern Ontario.
244 Woolwich St S, Unit 4, Breslau Ontario. N0B 1M0
Monday - Friday
Please call before coming.